The most common problem in the digitizing industry is thread breaks. You may have experienced the problem of splitting those bulky threads if you’re a beginner or even a seasoned quilter. “It can make you want to throw your hands in the air and scream, “Why is my thread still breaking on the sewing machine? What’s the problem and do I solve it? Well, this is a common but frustrating problem. It prevents everyone, including the expert sewer, from completing a piece you’re passionate about. In this article, I will tell you some types of thread breaks and how to reduce thread breaks in embroidery digitizing?
There are several ways to avoid these issues from happening occasionally. We have experts who are well conscious of the nitty-gritty of the digitizing process of embroidery. We will address all of the big thread breaking issues with you. In the embroidery digitizing process, why they occur and what steps we can take to avoid thread breaking.
When your thread keeps breaking, it’s frustrating. And reprocessing and patching the upper thread on your embroidery machine is getting more annoying and dull. It will help you easily define the problem and fix the problem by knowing why the thread break problem occurs. It will result in the job being done smoothly and productively. Let’s talk about the causes of the thread break, mistakes, and precautions.
Thread Break Errors
1. Check The Thread
The problem may be that it is not correctly installed in the sewing machine if your upper thread breaks. Familiarize yourself with and communicate with every part of the upper thread strand. By following the strand, you need to ensure that the top thread is correctly installed at each point. It will help you narrow down the source of the breaks in the thread and ensure that they operate smoothly.
2. Check The Needle
The needle is examined. It should be inserted in a specific manner. The flat side of the needle needs to be away from you. With the aid of a screwdriver, you can tighten the needle clamp. You don’t have to worry because you can find instructions on how to install and take care of each component on every sewing machine.
3. Check The Tension
Another factor that can lead to thread breaks in the digitization of embroidery is tension. You need both the upper and the lower tension to be tested. The top and bottom threads should have the same tension to achieve equal stitches. The lower strand may be adjusted by hand, if possible, depending on the embroidery machine you have. In addition, to be calibrated at the required strain, older machines would require upper and lower strands. That is because there are no automated modifications to the older unit.
4. Check The Bobbin
Bobbin can also be a thread breaking element. Check to ensure that the bobbin thread is correctly positioned. Ensure that the thread is wound uniformly in the case of the bobbin. Slow and consistent, it’s a rabbit and turtle race where you need to be a turtle.
Some Key Tips To Fix Problems
As mentioned above, if you face a bigger problem, a service might be required for your embroidery machine. Here are some tips to that will help you to reduce thread breaks in embroidery digitizing.
1. Make Sure There Is A Smooth Thread Path
Clearing the thread path is important. Clear the line in your direction. Take out the thread and follow the path. Slowly shift your hands around some major points, such as the throat plate or the bobbin. Ensure that there are no threads or needles that obstruct the thread’s path or disrupt the motion.
2. Always Use The Right Needle
Testing the needle is as critical as any other aspect. The correct needle’s use determines the consistency of stitches regardless of the material and instrument you are using. For instance, a thinner needle is required for thin or delicate fabrics and a thicker needle for heavier fabrics.
3. Don’t Forget To Check The Bobbin
For any bits floating away from earlier quilting efforts, search the bobbin and case. To clear up any bits that might be stuck in the case of the bobbin, you can turn your unit upside down and shake it a little bit.
4. Check The Throat Plate
Throat plate inspection. A throat plate is also referred to as a plate with a needle. Ensure that the throat’s surface on the computer is correctly located so that the needle does not contact the body. Unfortunately, people sometimes neglect this issue and appear to have a broken needle plate and have problems with thread breaks.
